-40%
Dayton Direct Drive Fan/Blower Motor 10J152, 115V AC, 1050 RPM, Shaded Pole, OAO
Dayton Direct Drive Fan/Blower Motor 10J152, 115V AC, 1050 RPM, Shaded Pole, OAO
Dayton Direct Drive Fan/Blower Motor 10J152, 115V AC, 1050 RPM, Shaded Pole, OAO
Dayton Direct Drive Fan/Blower Motor 10J152, 115V AC, 1050 RPM, Shaded Pole, OAO
Dayton Direct Drive Fan/Blower Motor 10J152, 115V AC, 1050 RPM, Shaded Pole, OAO
Dayton Direct Drive Fan/Blower Motor 10J152, 115V AC, 1050 RPM, Shaded Pole, OAO

Dayton Direct Drive Fan/Blower Motor 10J152, 115V AC, 1050 RPM, Shaded Pole, OAO

$ 13.17

Availability: 100 in stock
  • MPN: T16022183
  • Restocking Fee: No
  • Mounting Type: Stud
  • Brand: Dayton
  • Motor Design: Shaded Pole
  • Rated Load: 1/7 HP
  • Input Voltage: 115 V
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • AC Phase: Single Phase
  • Condition: Used, in decent condition. Tested to be working; however, there is significant noise and vibration present when running. This motor should NOT be used in in application where sound is an issue. Actual item for sale pictured.
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Enclosure Type: OAO (Open Air Over)

    Description

    Used, in decent condition. Tested to be working; however, there is significant noise and vibration present when running. This motor should
    NOT
    be used in in application where sound is an issue. Actual item for sale pictured.
    Technical Specifications
    HVAC Motor
    Motor Application: HVAC/R
    Motor Sub Application: Direct Drive Fan/Blower
    Phase: Single
    Motor Design: Shaded Pole
    HP: 1/7
    Nameplate RPM: 1,050
    Number of Speeds: 1
    Voltage: 115V AC
    Full Load Amps: 4.5
    Frame: 4.4 in
    Motor Thermal Protection: One-Shot
    Hz: 60
    Motor Service Factor: 1
    Insulation Class: B
    Motor Shaft Rotation: CWSE
    Maximum Ambient Temperature: 40° C
    Duty Cycle: Continuous
    Motor Enclosure Design: Open Air-Over
    Motor Mounting Type: Stud
    Motor Mounting Position: All Angle
    Shaft Diameter: 1/2 in
    Shaft Length: 2-1/2 in
    Motor Bearings: Sleeve
    Length Less Shaft: 2-3/4 in
    Body Diameter: 5 in
    Standards: CSA Certified, UL Recognized 507
    MSRP: .52